Technical Specification
MODEL | SHIELD B12 SM |
Anti-Ram class / Crash rating | Designed to stop 7.2 ton loaded vehicle @80km/hr known as K12 (M50-P1) |
Drive unit | B12-H (Hydraulic – external) |
Rising height | 650 – 1000 mm |
Width of blocked driveway | 2000 – 6000 mm |
Depth of unit | 300 – 400 mm |
Material | High tensile structural steel |
Axle Load | 30 Tons |
Structure & finish | Galvanized against resist to corrosion followed by epoxy paint |
Top plate | Anti-slip |
Hinges | Heavy duty hardened steel |
Input Voltage | 440 VAC ± 10%, 50/60 Hz, 3 phase or 220 VAC ± 10%, 50/60 Hz, 1 phase |
Raise /lower time | 3 – 6 sec, in emergency 1.5 sec |
Oil tank | 100 lt. – 350 lt. |
Protection class | IP 67 |
Coating | Signal yellow-black/yellow-red or customize color options available |
Blocking in raised position | Hydraulic lock |
Duty Cycle | 100% |
Breakout resistance | 16,80,000 J |
Operating temperatures | -20 C to + 60 C |
MTBF | 50,00,000 |
Safety
Safety against vehicles | Loop detector |
Safety against humans | Photo sensors |
Control unit | PLC/microprocessor based control unit with readily available integration with all access control devices |
Visual & Sound | 4 nos. of LED lights on front face & buzzer for operational alert |
Driver alert | Traffic light (Red/Green) – optional |
Smart integration | Can be integrated with TOTAL BA |
Power Failure
Power failure | Manual hand pump |
Manual | Mechanical manual release device |
Accumulator (optional) | Accumulator for 04 cycles up/down operations in case of power failure in emergency |