Shallow Mounted Bollards are available in three different models. These are managed by external hydraulic drive unit. Regulated by microprocessor or PLC controller, these products can easily integrate with different types of access control system. Meantime between failure of these Shallow Mounted Bollards is 50,00,000. Featured with IP67 protection rating, these are appreciated for maximum 16,80,000 J breakout resistance capacity. These can endure 25 ton axial load. Hot dip galvanized structure of these products has epoxy powder coated paint. These take maximum 6 second to rise up to 1200 mm height.
Technical Specification
MODEL | FORCE B12SM | FORCE B8SM | FORCE B4SM |
Type of bollard |
| Shallow mounted |
|
Anti-Ram Class/rating | K12 (M50 Designed to stop 7.2 ton loaded truck travelling @80 Km/h known as– P1) | K8 (M40 Designed to stop 7.2 ton loaded truck travelling @64 Km/h known as– P1) | K4 (M30 Designed to stop 7.2 ton loaded truck travelling @ 48 Km/h known as– P1) |
Drive Unit |
| Hydraulic (External) |
|
Rising height | 1200 MM | 1000 MM | 700 MM |
Blocking width | 450 MM | 350 MM | 350 MM |
Rising time | 5-6 sec | 4-5 sec | 3-4 sec |
Down time | 3-4 sec | 3-4 sec | 2-3 sec |
Material | Heavy duty high tensile steel | Heavy duty structural steel |
|
Axle Load capacity |
| 25 Ton |
|
Structure & finish | Hot dip galvanized against resist to corrosion followed by epoxy powder paint. | ||
Input Voltage | 440 VAC ± 10%, 50/60 Hz, 3 phase or 220 VAC ± 10%, 50/60 Hz, 1 phase Control Unit IP 67 | ||
Protection class |
| IP 67 |
|
Blocking in raised position |
| Hydraulic lock |
|
Breakout resistance | 16,80,000 J | 11,80,000 J | 7,20,000 J |
Duty cycle |
| 100% |
|
Operating temperature |
| – 20 C to + 60 C |
|
Control Unit | PLC/microprocessor based control panel with readily available option for integration with any access control system | ||
MTBF |
| 50,00,000 |
|