Anti-Ram Barrier Drop Arm Barrier
MODEL | VAJRA B12 |
Mechanism | Electro-hydraulic |
Anti-Ram Class / Rating | Designed to stop 7.2 ton loaded vehicle @80km/hr known as K12 (M50-P1) |
Arm length | 2500 - 7000 MM |
Height of Arm from ground | 1000 MM |
Power supply | 440 VAC ± 10%, 50/60 Hz, 3 phase or 220 VAC ± 10%, 50/60 Hz, 1 phase |
Material | Arm Holder frames fabricated from heavy steel sections, designed to support boom in the lowered position and to take full impact load |
Structure & finish | Galvanized against resist to corrosion followed by epoxy paint |
Raise & Lower time | 6-10 seconds, raising & lowering time can be adjusted by controlling the rate of flow into or out of the cylinder. |
Protection class | IP 67 |
Operations | Push button / remote control or with any third access control system like biometric, RFID, proximate readers etc. |
Duty Cycle | 100% |
Breakout resistance | 16,80,000 J |
MTBF | 50,00,000 |
SAFETY | |
Safety for vehicles | Loop detector |
Safety for humans | Photo sensors |
Control unit | PLC/microprocessor based control unit with readily available integration with all access control devices |
Visual and Sound | Radium reflective strips on the arm of VAJRA B12 & buzzer |
Driver alert | Traffic light (Red/Green) - optional |
Smart integration | Can be integrated with TOTAL BA |
POWER FAILURE | |
Power failure | Manual hand pump |
Manual | Mechanical manual release device |
Accumulator (optional) | Accumulator for 04 cycles up/down operations in case of emergency |